Description
Redline Hub W/ 5 on 4.5″ Bolt Pattern- 1″ Spindle For 2,000 lb Axles
Redline hub kits come with some of your main components like the inner and outer bearings. With Redline kits there is no need to worry about the races as they are already pressed into the hub for you. You will also get the grease seal, grease cap, and wheel nuts for the hub. This hub is designed for use with a 1″ diameter spindle. Each hub has a capacity of 1,250 lbs. Spindle nut and spindle washer sold separately.
Items in Kit:
• 2 L44643 Inner and Outer Bearings (1″ ID)
• 2 L44610 Inner and Outer Races(Already Pressed In) 1.98″ OD
• 1 12192TB Grease Seal (1.25″ x 1.979″)
• 1 46749 Grease Cap (1.986″ OD)
• 1 21-41-1 Grease Cap (1.986″ OD)
• 1 85-1 Grease Cap Plug
• 5 X1023R Coned Wheel Nuts
• 1 5 on 4.5″ Pregreased Hub For Convenience
• 1,250 lb Capacity Per Hub
•4″ Overall height
To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.
MULTIPLE SIZES AVAILABLE
